Cromford® Price Index by City and ZIP Code – Rolling 3 Months

About this chart

The Cromford® Price Index measures how much home prices have changed compared with the same point a year earlier, for comparable homes, measured every week. On this chart each point covers the homes that closed in the 3 months up to that week, the same span the S&P CoreLogic Case-Shiller index uses, so it shows a change in direction sooner than the 12-month version (PICZ01) but moves around more. Above zero, prices are higher than a year ago; below zero, they are lower.

Unlike the median sales price or the median price per square foot, the index is not moved by changes in which homes happen to sell. A quarter in which more large homes sell, or more small ones, does not show up as a rise or fall in prices.

Each year has its own line, laid out by week of the year, so you can compare this year with earlier years at the same point in the season. It opens on the last three years; tick any year back to 2002 in the Year panel.

It opens on Maricopa and Pinal Counties with every city and ZIP code included. Use the County, City, and ZIP panels to focus on any area, from a whole county down to a single ZIP code. Narrow it with the Dwelling Type and Transaction Type boxes and the sales price, home size, and year built sliders. It counts resales only: a new home’s first sale is left out, so every year compares the same kind of sale. The Inflation (CPI) option compares prices in today’s dollars, using national or Phoenix inflation.

Where fewer than 30 homes closed in either 3-month span for the area and filters chosen, no point is shown, because too few sales cannot give a reliable figure. Hover over a line to see the exact figure for that week and the number of sales behind it.

Cromford® Price Index by City and ZIP Code

About this chart

The Cromford® Price Index measures how much home prices have changed compared with the same point a year earlier, for comparable homes, measured every week. Each point covers the homes that closed in the 12 months up to that week. Above zero, prices are higher than a year ago; below zero, they are lower.

Unlike the median sales price or the median price per square foot, the index is not moved by changes in which homes happen to sell. A year in which more large homes sell, or more small ones, does not show up as a rise or fall in prices.

Each year has its own line, laid out by week of the year, so you can compare this year with earlier years at the same point in the season. It opens on the last three years; tick any year back to 2002 in the Year panel.

It opens on Maricopa and Pinal Counties with every city and ZIP code included. Use the County, City, and ZIP panels to focus on any area, from a whole county down to a single ZIP code. Narrow it with the Dwelling Type and Transaction Type boxes and the sales price, home size, and year built sliders. It counts resales only: a new home’s first sale is left out, so every year compares the same kind of sale. The Inflation (CPI) option compares prices in today’s dollars, using national or Phoenix inflation.

Where fewer than 30 homes closed in either year for the area and filters chosen, no point is shown, because too few sales cannot give a reliable figure. Hover over a line to see the exact figure for that week and the number of sales behind it.

Quarterly Median Sales Price per Square Foot by Region

About this chart

This chart shows the median sales price per square foot of homes that closed through ARMLS, measured every week. Each point covers the homes that closed in the three months up to that week. Price per square foot lets you compare homes of different sizes; the median is the figure in the middle, so a few unusual sales move it less than an average.

Each year has its own line, laid out by week of the year, so you can compare this year with earlier years at the same point in the season. It opens on the last three years; tick any year back to 2001 in the Year panel.

It opens on the eight Greater Phoenix regions. Use the Region panel to focus on one region or compare a combination of them. Narrow it with the Dwelling Type, Transaction Type, and New / Resale boxes and the sales price, home size, and year built sliders. The Inflation (CPI) option restates prices in today’s dollars using national or Phoenix inflation.

Hover over a line to see the exact figure for that week.

Sales Price per Square Foot Against the 2001-2020 CAGR and 4% and 5% a Year

About this chart

This chart compares the sales price per square foot of 1,500 to 2,000 sq ft homes that closed each month since January 2001 with four lines that show where prices would be at a steady rate of growth. The median is the middle of each home’s sale price divided by its square footage. The average is the total of the sale prices divided by the total of the square footage. Prices are not adjusted for inflation.

The 2001-2020 CAGR is the compound annual growth rate from the 2001 figure to the 2020 figure, each taken over all of that year’s closings, carried forward to today. The 2001-2003 trend takes the rate that best fits the monthly figures from January 2001 through December 2003 and carries it forward. The 5% and 4% lines grow at those rates each year from the same January 2001 figure as the CAGR line.

Lines from chooses whether the CAGR, trend and rate lines are worked out from the median or the average; it opens on the median. The rates are worked out for the homes selected, so they change with the filters, and the legend shows the current ones. If the filters leave too few closings in 2001-2003 or 2020, the lines are not drawn. The date slider under the chart changes the months shown, not the rates.

It opens on the Greater Phoenix area: the counties, cities, and ZIP codes that make it up are ticked to start with. Tick or untick any of them to change the area, including counties beyond Greater Phoenix. Use the home size slider to choose another size, and narrow it further with the Dwelling Type, Transaction Type, and New / Resale boxes and the list price and year built sliders.

It shows complete months only and is updated every day. Click a line in the legend to hide or show it. Hover over the chart to see each line’s figure and the number of closings for that month. Press Ctrl and point at the chart to mark the same month in every year; press Ctrl again to clear.

Quarterly Median Sales Price per Square Foot by City and ZIP Code

About this chart

This chart shows the median sales price per square foot of homes that closed through ARMLS, measured every week. Each point covers the homes that closed in the three months up to that week. Price per square foot lets you compare homes of different sizes; the median is the figure in the middle, so a few unusual sales move it less than an average.

Each year has its own line, laid out by week of the year, so you can compare this year with earlier years at the same point in the season. It opens on the last three years; tick any year back to 2001 in the Year panel.

It opens on Maricopa and Pinal Counties with every city and ZIP code included. Use the County, City, and ZIP panels to focus on any area, from a whole county down to a single ZIP code. Narrow it with the Dwelling Type, Transaction Type, and New / Resale boxes and the sales price, home size, and year built sliders. The Inflation (CPI) option restates prices in today’s dollars using national or Phoenix inflation.

Hover over a line to see the exact figure for that week.

6 Month Rolling Median Sales Price

About this chart

This chart shows the median sales price over six months, month by month: each point is the median of every closing in that month and the five months before it. The median sales price is the middle sale price of the homes that closed on ARMLS in the period: half sold for more and half for less. New homes are included. EM52-1 shows the median for each single month.

It opens on January 2021 to date; drag the handles of the date slider under the chart to choose the months shown, as far back as June 2000. The newest month counts its closings so far. The chart is updated every day.

It opens on the Greater Phoenix area: the counties, cities, and ZIP codes that make it up are ticked to start with. Tick or untick any of them to change the area, including counties beyond Greater Phoenix. Narrow it further with the Dwelling Type, Transaction Type, and New / Resale boxes and the list price, home size, and year built sliders.

Hover over the line to see the six months counted, the median, the lowest and highest sale, and the number of closings. Press Ctrl and point at the line to mark the same month in every year; press Ctrl again to clear.

Median Sales Price Map by Region

About this chart

This map colors each region by the median sales price of its closings over the time frame chosen, in 14 price ranges. Every ZIP code in a region takes the region’s color, so each region reads as one block, with its boundary drawn over it. A ZIP code in two regions is striped in both regions’ colors. The median sales price is the middle sale price of the homes that closed on ARMLS in the period: half sold for more and half for less. New homes are included. EM52-6 shows the same map by ZIP code.

It opens on the last 3 months to the newest closing, zoomed to the Greater Phoenix regions; use the Time Frame buttons over the map for the last day, week, month, 3 months, year, or 5 years. Click a price range in the legend to hide or show it. The map is updated every day.

It opens on the eight Greater Phoenix regions, every ZIP code in them. Use the Region boxes to pick any of the 19 regions: the eight Greater Phoenix regions and the eleven Rest of Arizona regions, from Tucson to the White Mountains. A ZIP code in two regions counts in both. Other areas (unticked to start with) adds the ZIP codes that are in no region. Some Rest of Arizona regions have few closings on ARMLS, so their medians can swing. Changing the County, City, or ZIP boxes limits the map to the areas ticked there as well. Narrow it further with the Dwelling Type, Transaction Type, and New / Resale boxes and the list price, home size, and year built sliders. Tick a Rest of Arizona region and zoom out to see it.

Hover over a ZIP code to light up its region and see the region’s median, its number of closings, and its price range.

Contract Fall-Throughs per Week

About this chart

This chart shows the number of contracts that fell through each week, a line per year. Weeks run Sunday to Saturday and week 1 of each year starts on 1 January, so the first and last weeks of a year can be short. A fall-through is an accepted contract (UCB, CCBS, or Pending) that ended without the home closing: the listing came back on the market, was taken temporarily off it, or was cancelled or expired while under contract. Each one is counted on the day it happened, so a home whose contract fell through twice counts twice.

It opens on the latest 3 years; tick other years in the Year box to go back as far as 2014. Click a ticked year again to fade it, and once more to remove it. Use the Month box to count only some months of the year. Only complete weeks are shown, so the newest point is the week that ended on the last Saturday. The chart is updated every week.

It opens on the Greater Phoenix area: the counties, cities, and ZIP codes that make it up are ticked to start with. Tick or untick any of them to change the area, including counties beyond Greater Phoenix. Narrow it further with the Dwelling Type, Transaction Type, and New / Resale boxes and the list price, home size, and year built sliders. The list price is the price when the contract was accepted.

Hover over the chart to see each year’s count for that week. Contracts that ended in a cancellation or expiration are also counted on the cancelled (CL52) and expired (EL51) listing charts. For the share of contracts that fall through, see FTRG01 and FTCZ01.

Year-to-Date Contract Fall-Throughs

About this chart

This chart shows the running total of contract fall-throughs from 1 January to the end of each week of the year, a line per year, so this year’s pace can be read against earlier years. Weeks run Sunday to Saturday and week 1 of each year starts on 1 January, so the first and last weeks of a year can be short. A fall-through is an accepted contract (UCB, CCBS, or Pending) that ended without the home closing: the listing came back on the market, was taken temporarily off it, or was cancelled or expired while under contract. Each one is counted on the day it happened, so a home whose contract fell through twice counts twice.

It opens on the latest 5 years; tick other years in the Year box to go back as far as 2014, and use the Month box to count only some months. Use Zoom to latest to see the newest complete week and four weeks either side, with every year’s total at that week. The chart is updated every week.

It opens on the Greater Phoenix area: the counties, cities, and ZIP codes that make it up are ticked to start with. Tick or untick any of them to change the area, including counties beyond Greater Phoenix. Narrow it further with the Dwelling Type, Transaction Type, and New / Resale boxes and the list price, home size, and year built sliders. The list price is the price when the contract was accepted.

Hover over the chart to see each year’s total at that week. Contracts that ended in a cancellation or expiration are also counted on the cancelled (CL52) and expired (EL51) listing charts. For the share of contracts that fall through, see FTRG01 and FTCZ01.

Price Changes, Days at the Final Price and Sale Price by Region – Current Year

About this chart

This chart shows how many times homes that closed this year changed their list price before going under contract, and what that meant for how long they took to sell and the price they sold for, by region. Each closed resale is grouped by the number of list price changes before the contract that closed, from none to five or more. Price increases and price cuts both count as a change.

The top chart compares two figures for each group. The wide bar is the median Cromford® Days on Market. The solid bar inside it is the median number of days the home spent at its final list price, the price that found the buyer. However long a home was on the market, the time it spent at the price that sold it is usually much shorter.

The lower left chart shows the median sale price as a percentage of the final list price (solid line) and of the initial list price (dashed line). The lower right chart shows the share of closings in each group.

The map shades every ZIP code with its region’s figure for the current year, so each region reads as one block. A few ZIP codes lie in two regions; they are striped in both regions’ shades and their closings count in both. Regions not ticked in the Region panel are faded. Click a ZIP code to show its region alone in the charts.

It covers closings in the current year to date only; for earlier years and year-to-year comparisons see PCRG01. Days count while the home was Active or Coming Soon, up to the contract that closed. A contract that fell through does not reset the count. New construction is excluded. The chart opens on the Greater Phoenix regions, with manufactured and modular homes left out.